banner



How To Replace Window Weather Stripping On A 98 Vette Convertible

corvette central window seal

The C5 Corvette lower outer side window seals (likewise known as belt mouldings, whiskers, or felts) take a beating from UV rays and tin can become brittle and subject to cracking. When this happens, water tin intrude inside the door and detract from the appearance of the automobile in general.

Replace Your C5 Corvette Window Seals in 12 Steps

The good news is that these seals are easy to replace. Here's how to install them:

Pace 1

corvette window seals

Open your C5 Corvette's driver side door and lower the window. And so apply a small-scale apartment-blade screwdriver to pry and push down on the locking tab to remove the small plastic encompass behind the door handle.

Footstep 2

corvette window seals

Remove the 2 screws behind the door handle using a T-27 Torx driver.

Stride 3

corvette window seals

Pry around and remove the cover on the door lever.

Step 4

corvette window seals

Using a pry tool, pry around the door console starting from the lower outboard door frame until it disengages from the door frame. Concord the door panel away from the door slightly.

Pace 5

corvette addition

Disconnect the console command panel wiring connector backside the door panel and remove the door panel.

Step 6

working on a corvette

Use a Phillips screwdriver to remove the spiral located in the upper inboard border of the door frame.

Stride vii

corvette seal

Catch and slide the outer side window moulding toward the rear of the door to disengage it, then remove it from the door.

Step 8

corvette part

The moulding on a C5 Corvette is held in place with a serial of cone-shaped pins that slide into retaining slots in the door.

Step ix

corvette work

Here are ii of the retaining slots in the door. They are wider at the rear and narrow down toward the front to agree the moulding in snugly.

Step 10

corvette window seals

Visually line upwardly the pins on the moulding with the retainer slots and press them into place.

Step 11

corvette window seals

When all the pins are seated, slide the moulding forward until the screw hole in information technology and the door line up.

Step 12

corvette window seals

Replace the Phillips screw removed earlier to lock the moulding in identify, and then reassemble your door in the opposite social club of assembly. Repeat these steps for the other door.

Where Can I Buy C5 Corvette Window Seals?

corvette parts

If y'all demand C5 Corvette parts, Corvette Central's got you covered! Nosotros acquit the post-obit C5 Corvette window seals:

  • 285060 97-04 Coupe Door Outer Window Seals / Belt Mouldings-Pair
  • 285010 98-04 Convertible Door Outer Window Seals / Belt Mouldings-Pair
  • 285076 99-04 Z06 & Hardtop Door Outer Window Seals / Chugalug Mouldings-Pair

For more information, requite our team a phone call or contact usa online .

How To Replace Window Weather Stripping On A 98 Vette Convertible,

Source: https://tech.corvettecentral.com/2021/07/how-to-install-c5-corvette-window-seals/

Posted by: scogginsscame1947.blogspot.com

0 Response to "How To Replace Window Weather Stripping On A 98 Vette Convertible"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel